The Dive Rite Voyager EXP Wings, donut-shaped air cells for single-tank diving, provide divers essential buoyancy control. With 35 lbs. (15.8 kg) of lift, streamlined side panels, and their minimalist, oval shape, the wings’ design provides maximum comfort throughout the dive with no squeezing or restrictions. The donut-shape design provides greater stability and control while diving by keeping an even volume of inflation on the top, sides, and bottom. This, along with an integrated Gusset Control System (GCS) that reduces "taco” effect and promotes effective streamlining, puts buoyancy where it is most needed (throughout the torso supporting the weight of the tank) for superior horizontal trim. The GCS is not like a bungee wing because it does not restrict airflow; instead, the GCS promotes added streamlining and buoyancy control, yet allows the wing to inflate to its full capacity. Even floating on the surface, the Dive Rite Voyager EXP Wing excels by keeping the diver in a vertical position when used in conjunction with a harness and crotch strap; it won’t tip you over.
The Dive Rite Voyager EXP Wing is made from durable 1680 ballistic nylon EXP material and further enhanced with a heavy-duty, 210 denier nylon laminated bladder.
Equipped with a choice of a 12- or 16-inch elbow or a 16-inch rapid exhaust (pull dump), appropriate low-pressure inflation hose, and two sets of marine-grade 316 stainless steel grommet mounting holes for attaching the wing to a harness, the Dive Rite Voyager EXP Wing can accommodate any diver’s needs.
As a part of the Dive Rite modular BCD system, the Dive Rite Voyager EXP Wing can be matched with either a TransPac® XT, Transplate, or any metal back plate and webbing harness.
Made in the USA.
Dive Rite Voyager EXP Wing Specifications:
Outer bag
Model BC4700 Voyager EXP: Durable 1680 denier ballistic nylon (highly resistant to pinches and punctures)
Inner bladder: 210-denier nylon laminated (highly resistant to pinches and punctures)
Wing Gusset Control system for streamlining
Lift: 35 lbs. (15.8 kg)
LP inflator hose
16-inch rapid exhaust (pull-dump) or 12- or 16-inch elbow
Mounting: Two sets of marine-grade 316 stainless steel grommet holes are used to attach wing to harness and set diver trim
Urethane flanges: Welded in place, which make it easy to switch out corrugated hoses and over pressurization valves without tools
Weight: 2.8 lbs. (1.27 kg)
Size: 22-in. H x 19-in. W (55.8cm x 48.3cm)
Made in the USA