Sea and Sea YS-01 Lighting Package with Grip Stay Arm Setup

Sea and Sea YS-01 Lighting Package with Grip Stay Arm Setup
Our PriceUS$600.00
CodeSeaAnd Seays01StrobeGripStay
Shipping:This item ships FREE!
Save wishlist

The Sea and Sea YS-01 Lighting Package with Grip Stay comes with everything you will need to add a single underwater strobe to your underwater Camera Housing. The Sea and Sea YS-01 Lighting Package with Grip Stay Set comes complete with the following items! The Sea and Sea YS 01 Strobe is a new a compact type slave strobe that can be used for all applications from wide angle to macro photography. You can switch between DS TTL (Digital Slave TTL) and a ten-level manual control function with the Sea and Sea YS 01 Strobe to enable fine adjustment of the light level according to the photographer's intentions. You can also set up a lighting system that uses two strobes in DS TTL mode. Power comes from four AA batteries for a powerful and long lasting strobe. You can enjoy taking pictures all day long without having to recharge the batteries. The Sea and Sea YS 01 Strobe has a recycle time that takes only about two seconds with nickel metal hydride batteries (2700 MAH) for stress free continuous shooting. The Sea and Sea YS 01 Strobe is furnished with a high luminance white LED target light (1W) indicating the optical axis of the strobe attached to its front face that is effective for night diving. You can fully exercise your creativity with the Sea and Sea YS 01 Strobe, which can be used as a primary strobe or secondary strobe in a wide range of applications, from compact digital cameras to digital SLR cameras.

The Sea and Sea Grip Stay is designed for compact digital camera housings with one compact external strobe or light. This Sea and Sea Grip Stay is perfect for use with the YS 01 or YS 02 Strobe. There is a space so a fiber optic cable can be passed through the grip in order to keep your gear streamlined.

To complete the package the Sea & Sea Strobe Mask Set and Fiber Optic Cable is included. The Strobe Mask Set is used to attach the Fiber Optic Cable to underwater housings that don't have fiber optic cable ports. The mask blocks the on-camera flash from exposing your subject, preventing back-scatter. The grommet allows the cable to be attached in front of the on-camera flash so the light will trigger your external YS-01 strobe.

  • Beam Angle 100°x 100° (with diffuser 110°x110°)
  • Batteries 4xAA A: 6V Ni-MH: 4.8V
  • Number of Flashes*1 A: 230 Ni-MH: 330
  • Recycle time (full)*2 A: 2.5 sec. Ni-MH: 1.9 sec.
  • Color temperature 5600K
  • Color temperature w/diffuser 5250K
  • Depth rating 75m / 250ft
  • Dimensions (WxHxD) 68x108x129mm / 2.7x4.3x5.2inch
  • The Sea and Sea YS 01 Strobe Weighs 505g / 17.7oz
  • Underwater weight -10g / -0.4oz
  • Exposure control: DS-TTL, TTL, Light level control dial (GN): 1 / 1.4 / 2 / 2.8 / 4 / 5.6 / 8 / 11 / 16 / 20 (10 steps)
  • Pre-flash control: Equipped with pre-flash cancel mode -
  • The Sea and Sea YS 01 Strobe has DS-TTL function -
  • Slave function
  • Auto power OFF function
  • Over-pressure relief valve
  • LED target light
No recommended products at the moment.
No recommended products at the moment.