Tank Boot

Tank Boot
Our PriceUS$17.95
CodeTankBoot
Save wishlist

Use the Tank Boot to protect the bottom of your tank and the deck of your boat, equipped with the hexagonal rim to limit roll while lying down. If you're buying one of these Tank Boots at the same time, we'll install it for you. If you would prefer us not to, just simply state that in your notes section at time of checkout. If you are going to install it yourself, put the boot in very hot water to soften it up, then install it by dropping the tank securely into the boot until it reaches the bottom. Once it cools off it will snug up to the tank securely.

WILL ONLY FIT ALUMINUM CYLINDERS

Available Sizes

  • 7.25 Inch (Fits ALuminum 80cf, 63cf)
  • 8.00 Inch (Fits Aluminum 100cf Compact 80cf)
  • 6.90 Inch (Fits Aluminum 50cf)

  • Please review these other products:

     
    XS Scuba Steel Cylinder Carry Handle
    The XS Scuba Steel Cylinder Carry Handle makes transporting most steel cylinders easy and far less uncomfortable. The XS Scuba Steel Cylinder Carry Handle is made of tough injection-molded plastic with a foldable hinge so that you can fold down the handle when not in use. The XS Scuba Steel Cylinder Carry Handle fits Faber Steel Cylinders as well as XS Scuba Worthington Steel Cylinders excluding the XS Scuba Worthington LP77 Cylinder.
    Our Price: US$16.95

    click to see more

     
    The XS Scuba Steel Cylinder Carry Handle makes transporting most steel cylinders easy and far less uncomfortable. The XS Scuba Steel Cylinder Carry Handle is made of tough injection-molded plastic with a foldable hinge so that you can fold down the handle when not in use. The XS Scuba Steel Cylinder Carry Handle fits Faber Steel Cylinders as well as XS Scuba Worthington Steel Cylinders excluding the XS Scuba Worthington LP77 Cylinder.
    Our Price: US$16.95

    click to see more

     
    Tank Banger
    In a world where communication is is hard enough, why make it harder? There are so many underwater noise makers out there that just don't cut it. The Tank Banger will certainly get other divers attention and can be heard at great distances und Our Price: US$11.95

    click to see more

     
    In a world where communication is is hard enough, why make it harder? There are so many underwater noise makers out there that just don't cut it. The Tank Banger will certainly get other divers attention and can be heard at great distances und
    Our Price: US$11.95

    click to see more

     
    Trident Tank Valve Cap
    View
    The Trident Tank Valve cap is a great way to protect your scuba tank valve from dings and scratches while in travel or storage. Made from vinyl rubber the will can protect the valve head as well as prevent dust and other particles from contaminating the valve outlet or the valve O-ring. The Trident Tank Valve cap is also commonly used as an identifier for to determining whether the scuba tank is full, has been used or just less than full.

    click to see more

     
     
    Dive Rite Belt Slide
    View The Dive Rite Belt Slide is used to lock hardware, such as a D-ring, in place on a webbing harness or weight belt. Available in 1-inch (HW1020-1), 1.5-inch (HW1020-1.5), 2-inch (HW1020) and 2-inch serrated (HW1066). The Dive Rite Belt Slide is made of marine

    click to see more

     
     
    Underwater Kinetics Super BC/Regulator Hanger
    View
    When the average hanger just doesn’t cut it, rely on the Underwater Kinetics Super BC/Regulator Hanger. Your work gear can sometimes become wet and heavy. So, UK built this super strong hanger with high-quality, non-corrosive materials. It holds more weight, so your valuable stuff won’t end up on the ground. This sturdy, non-corroding Underwater Kinetics Super BC/Regulator Hanger will support your heavy suits during drying and storage.

    click to see more

     
     
    Standard Replacement Mouthpiece
    View Standard Replacement Mouthpiece for your regulator or octo in your choice of colors. And we'll toss in a Tie Wrap for you.

    click to see more

     
     
    Trident Tank Valve Cap
    View
    The Trident Tank Valve cap is a great way to protect your scuba tank valve from dings and scratches while in travel or storage. Made from vinyl rubber the will can protect the valve head as well as prevent dust and other particles from contaminating the valve outlet or the valve O-ring. The Trident Tank Valve cap is also commonly used as an identifier for to determining whether the scuba tank is full, has been used or just less than full.

    click to see more

     
     
    Tropical Booties
    View These 3 mm neoprene boots have glued and blind-stitched seams for durability. High enough so fins won't rub on your foot - but low enough so you don't look like the guy wearing shorts and black socks on the beach! They come in black.

    click to see more