Tusa X-Pert Zoom Z3 Split Fins

Tusa X-Pert Zoom Z3 Split Fins
Our PriceUS$128.95
Shipping:This item ships FREE!
Save wishlist

Over 5 years of research and development brought the highly regarded and best-selling SF-8 X-Pert Zoom split fin to market in 2003. TUSA redefines the fin market again with the introduction of the SF-15 Tusa X-Pert Zoom Z3 Split Fin.

The SF-15 Tusa X-Pert Zoom Z3 Split Fin further improves upon the performance, features and design of the SF-8 with the incorporation of 3 materials, 10% longer blade length, enhanced propeller-fin technology, reinforced blade rails and optimized blade scoops. These new features along with TUSA's patented 27° Angled Blade Design and EZ strap buckle system make the SF-15 Tusa X-Pert Zoom Z3 Split Fin, THE fin for divers.

SF-15 Tusa X-Pert Zoom Z3 Split Fin Angled Blade Design:
When using the standard traditional blade fin, with the leg completely extended, there remains an angle of 27° between the heel and the foot and the calf of the leg, causing a 10% loss of propulsion. Because the fin is angled below the body, during the kick phase, the body is pushed forward and down, instead of straight ahead. With the SF-15 fin, that 27° angle has been designed into the fin. This means that 100% of the energy expended during the kick phase is directed toward the propulsion of the diver. To achieve maximum performance from the SF-15 Tusa X-Pert Zoom Z3 Split Fin, use a small bent-knee kick with a light rhythm. This creates less strain on the leg muscles compared with traditional fins, reducing the diver's fatigue and subsequent air consumption.

SF-15 Tusa X-Pert Zoom Z3 Split Fin Key Features:
Three material design for increased performance compared to standard split fins
Patented 27° Angled Blade Design
Enhanced propeller-fin technology optimizes efficiency
Multi-compound foot pocket increases power transfer to the fin blade
Reinforced side-rails decrease blade separation increasing stability and kick-style versatility
Optimized blade scoops increase water channeling
Innovative hydrofoil design that produces forward motion (propulsion) with less effort
10% longer blade than SF-8 for enhanced propeller effect
TUSA patented EZ Strap and buckle system
Color: Black (BK), Cobalt Blue (CBL), Flash Yellow (FY), Metallic Red (MDR), Pearlescent Pink (PP), White (WH)
Sizes: S, M, L (PP available in S, M only)

SF-15 Tusa X-Pert Zoom Z3 Split Fin Technology:
Angled Blade Design (A.B.D.)
A standard flat fin inhibits propulsion solely by fault of design. An angle between the heel of the foot and the calf of the leg remains when the leg is extended to kick. This angle causes approximately 10% of the propulsion to be lost. The Angled Blade Design accommodates for this anatomical characteristic and ensures maximum efficiency throughout the kicking cycle.

EZ Strap and Buckle System
TUSA's EZ strap and Buckle System allows fins to be quickly and easily adjusted with minimal effort. Adjustment can be made while the fins are worn, allowing for a precise fit and ease of removal when necessary.

Propeller Technology
TUSA’s advanced split fins employ Propeller-FinTM Technology, which delivers ultra-high performance with a low amplitude rapid flutter kick. As the fin moves through the water its two wing-shaped surfaces create lift and forward propulsion like a propeller. Any water traveling over the top of the blade is funneled into and out of the split between the blades. Efficiency is increased while drag and effort is reduced.

Please review these other products:

Atomic Split Fin
View The Atomic Split fin swims with less effort, stress and strain resulting in greater sustained speed, power and comfort. Independent testing has shown that this design can significantly reduce air consumption! The Atomic Split fin comes

click to see more

Cetacea BCQR7 utility clip
View BCQR7 utility is a great fin carry strap. Utility clip with male and female quick release adapter attaches to itself to create a secure loop. The utility clip is perfect for keeping mask, fins and accessories together when entering or exiting the water.

click to see more

Apollo Bio Fin Pro with Spring Straps
View With the Apollo Bio Fin Pro with Spring Straps, your body will barley register the effort of kick but with each kick you are definitely moving... and moving Fast!

Now what makes the Apollo Bio Fin Pro's with Spring Straps different

click to see more

Innovative Ez Recreational Spring Fin Strap
View The EZ Recreational Diver Spring Straps From Innovative Scuba concepts use industry standard quick release buckles that will easily attach to most any fin on the market! The Innovative Scuba EZ Recreational Diver Spring Straps automatic

click to see more

Mares X-Stream Dive Fins
View X-Stream Says it all with the Mares X-Stream Dive Fins!

The Mares X-Stream Dive Fins get their name from the X-Stream Comfort and X-Ceptional Efficiency of this unique fin design. The Mares X-Stream Dive Fins feature a p

click to see more

Tusa Imprex 5mm Dive Boot
The DB0101 Tusa IMPREX 5mm Dive boots feature and injection molded sole with super traction. Made from 5.0 mm neoprene and nylon jersey these are sure to give your feet superior comfort. The Tusa IMPREX 5mm Dive boots are the next evolution in the line of Tusa boots which have just gotten better each couple of years. You can't go wrong with the Tusa IMPREX 5mm Dive boots.

click to see more

XS Scuba Stretch Fin Straps
View Stretch Strap says it all! The hot new XS Scuba Stretch Fin Straps are made with liquid silicone injection making them extremely stretchy and strong. The XS Scuba Stretch Fin Straps attaches to most modern fins with post style mounting.

click to see more

No recommended products at the moment.