Dive Rite Tank Bands and Bolts

Dive Rite Tank Bands and Bolts
Our PriceUS$185.00
CodeGM1033-Set GM1036-Set GM1037-Set
Shipping:This item ships FREE!
Save wishlist
Add to comparison chart | Compare Products

Dive Rite Tank Bands and Bolts are tungsten inert gas welded (TIG) and have beveled edges that minimize scratching of painted tanks during assembly. They are constructed of 18-gauge, 304 stainless steel, with a #3 polished finish and 11-gauge, 304 stainless steel structural plates. 304 stainless steel is a high grade, low carbon alloy that resists corrosion, even in saltwater. Every band is precision sheared and punched and goes through a stringent quality control test during each step of the manufacturing process. The Dive Rite Tank Bands and Bolts also include an appropriately sized stainless steel all-thread bolt kit which is also made of 304 stainless steel. Made in the U.S.A.


Dive Rite Tank Bands and Bolts Technical Specifications:
18-gauge, 304 stainless steel with #3 polished finish and 11-gauge, 304 stainless steel structural plates resist saltwater corrosion
TIG welds provide exceptional strength
Beveled, smooth edges eliminate scratching
GM1029 5.5-inch Tank Bands are 2.5-Inches Fits Steel LP50
GM1032 6.5-inch Tank Bands are 2.5-inches Fits AL72 and Steel LP85
GM1033 7.25-inch Tank Bands are 2.5-inches (6.4 cm) in width
Fits 7.25-inch (184 mm) diameter bands. Fits US-standard AL80, HP80, HP100, HP120 and all E7/X7 and European-standard tanks with 8.5 inch (216 mm) center to center spacing.
GM1037 8-inch Tank Bands are 3-inches (7.6 cm) in width
8-inch (203 mm) diameter bands. Fits US-standard AL100, LP95, LP104, HP119, LP120, HP130 and all E8/X8 tanks and European-standard 15L and 18L tanks (203 mm).
4.7 lbs (2.13 kg)
Made in USA


These are not overseas made sub standard bands. These are all made in the U.S. and made of solid Stainless Steel.
Please review these other products:

 
Dive Rite 200 Bar Manifold
The Dive Rite 200 Bar Manifold uses two barrel o-rings to seal either end of the cross-bar, which provides better shock absorption and redundancy compared to the old-style metal-to-metal seal manifolds. The Dive Rite 200 Bar Manifold has a 180mm isolation crossbar that fits both 7.25-inch and 8-inch diameter tanks and recessed burst disks are protected from accidental shearing.
Our Price: US$270.00

click to see more

 
The Dive Rite 200 Bar Manifold uses two barrel o-rings to seal either end of the cross-bar, which provides better shock absorption and redundancy compared to the old-style metal-to-metal seal manifolds. The Dive Rite 200 Bar Manifold has a 180mm isolation crossbar that fits both 7.25-inch and 8-inch diameter tanks and recessed burst disks are protected from accidental shearing.
Our Price: US$270.00

click to see more

 
Dive Rite Transpac Stabilizer Plates for Doubles
The stainless steel Dive Rite Transpac Stabilizer Plates for Doubles firmly secure a TransPac to any set of double tanks that use industry-standard bands and bolts.
 Our Price: US$16.50

click to see more

 
The stainless steel Dive Rite Transpac Stabilizer Plates for Doubles firmly secure a TransPac to any set of double tanks that use industry-standard bands and bolts.
Our Price: US$16.50

click to see more

 
Highland Tank Bands Stainless Steel
View The Highland Tank Bands are the best in the business when it comes to tank bands, and we now carry both 7.25'' and 8'' bands. The Stainless Steel Highland Tank Bands comes with Stainless steel mounting hardware.

click to see more

 
 
HOG Stainless Steel Backplate
The HOG Stainless Steel Backplate has tank cam band slots, doubles mounting slot, and a crotch strap slot. The HOG Stainless Steel Backplate weighs 6Lbs. The HOG Stainless Steel Backplate are designed with 1.0-inch and 2.0-inc Our Price: US$109.95

click to see more

 
The HOG Stainless Steel Backplate has tank cam band slots, doubles mounting slot, and a crotch strap slot. The HOG Stainless Steel Backplate weighs 6Lbs. The HOG Stainless Steel Backplate are designed with 1.0-inch and 2.0-inc
Our Price: US$109.95

click to see more

 
Zeagle 6.5 inch Bolt Kit for 8 Bands
The Zeagle 6.5 inch Bolt Kit for 8" Bands are a pair of 6.5" long stainless steel bolts complete with 3 hex nuts, 2 washers and 1 Wing Nut on each to fasten the bands. These are required in order to attach you BCD or Backplate to the Zeagle Twin Bands for Dual 8 inch Cylinders.
 Our Price: US$20.95

click to see more

 
The Zeagle 6.5 inch Bolt Kit for 8" Bands are a pair of 6.5" long stainless steel bolts complete with 3 hex nuts, 2 washers and 1 Wing Nut on each to fasten the bands. These are required in order to attach you BCD or Backplate to the Zeagle Twin Bands for Dual 8 inch Cylinders.
Our Price: US$20.95

click to see more

 
Zeagle Twin Cylinder Mounting Plates
Zeagle's Twin Cylinder Mounting Plates are an alternative to a full metal backplate when mounting twin cylinders to your Zeagle BC. Mounted in the same location as a metal backplate, these mounting plates distribute the weight of the cylinders so as not to damage or stress the material of the BC vest while on the surface.

 Our Price: US$41.95

click to see more

 
Zeagle's Twin Cylinder Mounting Plates are an alternative to a full metal backplate when mounting twin cylinders to your Zeagle BC. Mounted in the same location as a metal backplate, these mounting plates distribute the weight of the cylinders so as not to damage or stress the material of the BC vest while on the surface.

Our Price: US$41.95

click to see more

 
Dive Rite 200 Bar valve
View
Dive Rite 200 Bar valves are chrome-plated brass for rugged protection and durability. Double o-ring seals provide redundancy as well as better shock absorption. Ribbed rubber hand wheels are tough, yet easy to open and close. The left valve paired with the right valve can be used for independent doubles, a doubles manifold, sidemount, and rebreather cylinders.

click to see more

 
 
Miflex Xtreme Low Pressure Braided Regulator Hoses
View
Miflex Xtreme Low Pressure Braided Regulator Hoses feature an external nylon safety braiding designed to resist the snags and abrasions that divers can often encounter. The patent Pending XTREME double braiding also resists UV rays out of the water, thus extending the lifespan of the hose.

Unlike traditional hoses, the XTREME nylon safety braiding is not simply pushed over the hose fittings. Instead the braiding is tightly bound and fixed to the hose core by stainless steel or brass sleeve.

click to see more