Dive Rite Mini Tech Gauge

Dive Rite Mini Tech Gauge
Our PriceUS$82.00
CodeRG2762
Shipping:This item ships FREE!
Save wishlist
Add to comparison chart | Compare Products

A clean, black and white face means the Dive Rite Mini Tech Gauge is easy to read. This naked gauge has a 2-inch diameter with a 1.75-inch face (RG2762).

A Bourdon tube gauge, the Dive Rite Mini Tech Gauge is calibrated to 5000-psi in 100-psi increments (360-Bar in 10-Bar increments) for the highest level of accuracy. A tempered glass face is impact and scratch resistant, while the luminescent dial makes it easier to read in low light situations.

Comes standard as a naked SPG with a spool to attach a hose swivel to the gauge. A boot is available as a separate option, if desired. The Dive Rite Mini Tech Gauge is suitable for oxygen service and is CE approved.

Available Pressure Options:
  • Imperial 5000 PSI
  • Metric 360 BAR

Available Boot Options:
  • Naked Gauge - No Boot
  • Include the Boot

Available Hose Options:
  • No Hose
  • 6 inch HP Hose
  • 24 inch HP Hose
  • 26 inch HP Hose
  • 32 inch HP Hose

Tips:
  1. Single tank diving: 32" hose
  2. Backmount doubles: 24-26", depending on height of diver
  3. Sidemount tanks: 6" hose length, depending on diver preference

Please review these other products:

 
Miflex High Pressure Carbon HD Hose
View The Miflex High Pressure Carbon HD Hose is lightweight and very slim offering great flexibility! With its high abrasion resistance, flexibility and long life the Miflex High Pressure Carbon HD Hose brings clear benefits when compared t

click to see more

 
 
Oceanic Swiv SPG Pressure Gauge
View
Modular flexibility. The SWIV SPG is an accurate and reliable submersible pressure gauge rated to 5,000 psi. Available as a stand-alone gauge or in any Oceanic SWIV console.

click to see more

 
 
XS Scuba 2" Brass & Snap SPG by Highland
View
The XS Scuba 2" Brass & Snap SPG by Highland is a unique design to where it has an attachment clip integrated to the gauge. The full size robust pressure gauge has a nikel plated housing with tempered glass and it is ready to mount directly to a high pressure hose. The airspool with viton o-rings are also included with the XS Scuba 2" Brass & Snap SPG by Highland. The Gauge reads a wide 270 degree sweep from 0 to 5000 PSI or 0 to 420 BAR. The Snapbolt shackle is made from stainless steel. The XS Scuba 2" Brass & Snap SPG by Highland now has another option for attaching it to the snap bolt so that you don't have to hard mount it to your self and making it harder to break away in an emergency. You can now add a 5 piece break away strap kit to your order and they will serve to keep the brass gauge attached to your snap bolt allowing you to pull them apart if ever in an emergency.

click to see more

 
 
XS Scuba 2.5" Brass and Glass SPG by Highland
View
The XS Scuba 2.5" Brass and Glass SPG by Highland is a full sized robust quality pressure gauge made from Nikel-plated brass with a tempered glass lens. The XS Scuba 2.5" Brass and Glass SPG by Highland is ready to mount directly to a high pressure hose. The airspool is included. The XS Scuba 2.5" Brass and Glass SPG by Highland has a bright easy to ready luminescent face with a wide 270 degree sweep from 0 to 5000 PSI or 0 to 420 BAR. The XS Scuba 2.5" Brass and Glass SPG by Highland also comes with a built in over pressure relief valve for safety. The high pressure hose is not included.

click to see more

 
No recommended products at the moment.