Highland 90 Degree Gauge Adapter

Highland 90 Degree Gauge Adapter
Our PriceUS$17.95
CodeHL403-90
Shipping:This item ships FREE!
Save wishlist
Add to comparison chart | Compare Products

The Highland 90 Degree Gauge Adapter is used to mount a mini Tech gauge or any other pony gauge to the end of a standard high pressure hose at a 90 degree angle. The airspool is included with the Highland 90 Degree Gauge Adapter.


Highland 90 Degree Gauge Adapter Features:
Use to mount a Mini Tech Gauge to HP hose
Right angle (90º) with the HP hose
Airspool with Viton o-rings included


If you would rather have your gauge come straight out of the end of the hose, take a look at the Highland Inline Gauge Adapter.
Please review these other products:

 
XS Scuba 2" Brass and Glass SPG by Highland
View
The XS Scuba 2" Brass and Glass SPG by Highland is a full sized robust quality pressure gauge made from Nikel-plated brass with a tempered glass lens. The XS Scuba 2" Brass and Glass SPG by Highland is ready to mount directly to a high pressure hose. The airspool is included. The XS Scuba 2" Brass and Glass SPG by Highland has a bright easy to ready luminescent face with a wide 270 degree sweep from 0 to 5000 PSI or 0 to 420 BAR. The XS Scuba 2" Brass and Glass SPG by Highland also comes with a built in over pressure relief valve for safety. The high pressure hose is not included.

click to see more

 
 
Highland Mini Tech Gauge by XS Scuba
View
The Highland Mini Tech Gauge by XS Scuba can be used either as a mini gauge on a hose or as a first stage pony gauge. The Highland Mini Tech Gauge by XS Scuba has a bright white luminescent face thats easy to read with 210 degree sweep. The Highland Mini Tech Gauge by XS Scuba includes the inline gauge adapter to install on the end of a high pressure hose as well as the airspool.

click to see more

 
 
XS Scuba Inline Shut Off for First Stage
The XS Scuba Inline Shut Off for First Stage Install between first stage low pressure port and standard regulator hose. The XS Scuba Inline Shut Off for First Stage has 3/8-24 UNF male inlet to 3/8-24 UNF female outlet threads. The XS Scuba Inline Shut Off for First Stage allows you to slide the machined Delrin collar to shut off gas flow, Commonly used with rebreather systems. Prevent critical gas loss in the case of a second stage failure.

 Our Price: US$29.95

click to see more

 
The XS Scuba Inline Shut Off for First Stage Install between first stage low pressure port and standard regulator hose. The XS Scuba Inline Shut Off for First Stage has 3/8-24 UNF male inlet to 3/8-24 UNF female outlet threads. The XS Scuba Inline Shut Off for First Stage allows you to slide the machined Delrin collar to shut off gas flow, Commonly used with rebreather systems. Prevent critical gas loss in the case of a second stage failure.

Our Price: US$29.95

click to see more

 
XS Scuba Regulator Hose to Regulator Hose Connector
The XS Scuba Regulator Hose to Regulator Hose Connector is used to connect two regulators together to make one longer hose. The XS Scuba Regulator Hose to Regulator Hose Connector is a much less expensive way to extend your hose rather than buying a longer hose.
 Our Price: US$10.95

click to see more

 
The XS Scuba Regulator Hose to Regulator Hose Connector is used to connect two regulators together to make one longer hose. The XS Scuba Regulator Hose to Regulator Hose Connector is a much less expensive way to extend your hose rather than buying a longer hose.
Our Price: US$10.95

click to see more

 
XS Scuba Low Pressure Port Extender
With the Low Pressure Port Extender you can extend the placement of low pressure port away from first stage.  Our Price: US$10.95

click to see more

 
With the Low Pressure Port Extender you can extend the placement of low pressure port away from first stage. 
Our Price: US$10.95

click to see more

 
XS Scuba 2" Brass & Snap SPG by Highland
View
The XS Scuba 2" Brass & Snap SPG by Highland is a unique design to where it has an attachment clip integrated to the gauge. The full size robust pressure gauge has a nikel plated housing with tempered glass and it is ready to mount directly to a high pressure hose. The airspool with viton o-rings are also included with the XS Scuba 2" Brass & Snap SPG by Highland. The Gauge reads a wide 270 degree sweep from 0 to 5000 PSI or 0 to 420 BAR. The Snapbolt shackle is made from stainless steel. The XS Scuba 2" Brass & Snap SPG by Highland now has another option for attaching it to the snap bolt so that you don't have to hard mount it to your self and making it harder to break away in an emergency. You can now add a 5 piece break away strap kit to your order and they will serve to keep the brass gauge attached to your snap bolt allowing you to pull them apart if ever in an emergency.

click to see more

 
 
Highland Inline Gauge Adapter
The Highland Inline Gauge Adapter is used to mount a mini Tech gauge or any other pony gauge to the end of a standard high pressure hose. The airspool is included with the Highland Inline Gauge Adapter.

 Our Price: US$17.95

click to see more

 
The Highland Inline Gauge Adapter is used to mount a mini Tech gauge or any other pony gauge to the end of a standard high pressure hose. The airspool is included with the Highland Inline Gauge Adapter.

Our Price: US$17.95

click to see more

No recommended products at the moment.