The Dive Rite Single Tank Transplate Package is a Backplate and Wing system set up for Single Tank diving. Comes complete with the Dive Rite Transplate Harness,Your Choice of 4 Dive Rite wings, Dive Rite Crotch Strap, Dive Rite XT Lite SS Backplate and 2 Dive Rite Roller Buckle Cam Straps. Upgrades are available upon request.
Dive Rite Transplate Harness Details:
A hybrid harness designed for divers who want the support of a backpack-style harness for better weight-load distribution, yet wish to dive a hard metal backplate. Designed like a mountaineer's backpack, the TransPlate harness disperses weight across the hips and back, minimizing shoulder strain. When used with a 6-pound steel backplate, divers can remove or minimize weight pockets. Adjustable straps adapt to a wide variety of exposure suits and means easy donning and doffing. The modular design allows for customization with a wide variety of pockets and accessories. Available in sizes Medium thru XXL. Made in the U.S.A.
Dive Rite Transplate Harness Specifications:
Shoulder pads constructed of 1000 denier ballistic nylon fabric for tear and abrasion resistance. Two-inch (50mm) nylon webbing rated at 7,000 lbs breaking strength forms the shoulder straps and waist strap.
Four 2-inch D-rings on each shoulder strap are slightly bent for improved access and placement can be adjusted. Note: Size Medium has only one 2-inch D-ring per shoulder strap due to space limitations.
Marine Grade 316 stainless steel hardware is used throughout including: (2) bent D-rings on each shoulder strap(except MED that has only 1 bent D-ring per shoulder) and (2) waist D-rings, XT chest plates, belt buckle, cam strap buckles, and side plates.
Shoulder straps feature pivot rings at chest level for comfort, fit, and load distribution.
Acetyl resin engineered plastic quick release buckles on shoulders for easy doff and don.
One-inch nylon webbing rated at 2,200 lbs breaking strength and a Delrin 1-inch quick release buckle are used for a chest strap.
Marine grade stainless steel base plates allow for proper placement of shoulder straps. Plates can be moved forward or backward on the waist strap to get the best fit and performance.
Med: 2lbs 7oz (1.10kg), Lg:2 lbs 8 oz (1.16kg), XL:2 lbs 9 oz (1.16kg), XXL:3 lbs (1.36kg)
Made in U.S.A.
Dive Rite Stainless Steel Xt Lite Backplate details:
The next generation of lightweight backplates has arrived. Dive Rite has taken the reliability of the stainless steel backplate and combined it with the light weight characteristics of non-stainless steel backplates. The new Dive Rite XT Lite is constructed from 16 guage 316L grade stainless steel, which is a low carbon, rust resistant grade of stainless. A series of cut-outs along the body of the plate reduce its overall weight while still maintaining the support needed for the heaviest of double cylinder configurations. All edges are laser cut, and individually finished by hand to ensure that there are no rough or jagged edges anywhere on the plate.
The XT Lite backplate is configures with 11" on center mounting holes to accommodate standard double tank bolt kits, including two holes for the upper bolt to give adjustability of tank height. Two sets of 2" slots along the center allow divers to use the XT Lite for single tank diving without the need for a single tank adapter. A series of 3/8"diameter holes and 1" slots along the outer edges of the plate give different options for mounting lights, pony bottles, lift bags, and other accessories. 2" and 1" slots at the bottom center of the plate allow for any size crotch strap up to 2" in width to be used. Made in the USA.
Dive Rite Stainless Steel XT Lite Backplate Specifications:
Material: 16 Guage 316L Stainless Steel
Weight: 2lb 9.4oz
10.5″ (26.7cm)(widest point) x 15″ (39.4cm)
1.25″ (3.2cm) depth (with contour)
Made in the USA
Dive Rite Travel XT or EXP Wing details:
A lightweight wing designed for single-tank, warm water diving, our Travel series of wings are small-profile and ideal for travel and divers who wear a minimal amount of weight. At 25lbs/11.3 kg of lift, the Travel can accommodate one 80ft3/12 L tank with no more than 16lbs. of additional weight.
With its donut-shape, the Travel wing provides greater stability and control in the water. Donut-style or 360 degree wings promote an even volume of inflation on top, sides and bottom, which improves buoyancy control and promotes a more efficient, horizontal trim.
Divers may choose from our durable 1680 ballistic nylon EXP material or our even more rugged SuperFabric® brand technology XT material that creates an armor-clad outer shell that is impervious to damaging pinches and cuts, with a 1680 ballistic nylon diver's side panel. Both the Travel EXP (Model BC 4100) and Travel XT (Model 5100) are further enhanced with a heavy-duty, 210 denier nylon laminated bladder. They are backed by our WORRY-FREE LIFETIME GUARANTEE and are made exclusively in the U.S.A.
As a part of our modular BCD system, it can be matched with either a TransPac® XT, Transplate or any metal backplate and webbing harness.
Dive Rite Travel XT or EXP Wing Specifications:
Model BC4100 Travel EXP outer bag is made of durable 1680 denier ballistic nylon that resists tears and abrasion
Model BC5100 Travel XT outer bag is made of SuperFabric brand technology outer shell and 1680 ballistic nylon diver’s side panel.
Inner bladder is constructed from heavy-duty 210 denier nylon laminated bladder which is highly resistant to pinches and punctures
Urethane flanges are welded in place, which make it easy to switch out corrugated hoses and over pressurization valves without tools.
Comes equipped with choice of 16-inch rapid exhaust (pull dump), 16-inch or 12-inch elbow along with either15-inch, 22-inch or 27-inch low pressure inflation hose.
A set of marine-grade 316 stainless steel grommet mounting holes are used to attach wing to harness and/or singles mounting plate.
Approximate dimensions uninflated: 21.5-in H x 15-in W (54.6cm x 38.1cm)
2.4 lbs (1 kg)
Dive Rite Voyager XT or EXP Wing details:
The Voyager Series wings, donut-shaped air cells for single-tank diving, provide divers essential buoyancy control. With 35 lbs. (15.8 kg) of lift, streamlined side panels, and their minimalist, oval shape, the wings’ design provides maximum comfort throughout the dive with no squeezing or restrictions. The donut-shape design provides greater stability and control while diving by keeping an even volume of inflation on the top, sides, and bottom. This, along with an integrated Gusset Control System (GCS) that reduces "taco” effect and promotes effective streamlining, puts buoyancy where it is most needed (throughout the torso supporting the weight of the tank) for superior horizontal trim. The GCS is not like a bungee wing because it does not restrict airflow; instead, the GCS promotes added streamlining and buoyancy control, yet allows the wing to inflate to its full capacity. Even floating on the surface, the Voyager Series wings excel by keeping the diver in a vertical position when used in conjunction with a harness and crotch strap; it won’t tip you over.
Divers may choose from our durable 1680 ballistic nylon EXP material or our even more rugged SuperFabric® brand technology XT material that creates an armor-clad outer shell that is impervious to damaging pinches and cuts, with a 1680 ballistic nylon diver's side panel. Both the Voyager EXP (Model BC4700) and Voyager XT (Model5200) are further enhanced with a heavy-duty, 210 denier nylon laminated bladder.
Equipped with a choice of a 12- or 16-inch elbow or a 16-inch rapid exhaust (pull dump), appropriate low-pressure inflation hose, and two sets of marine-grade 316 stainless steel grommet mounting holes for attaching the wing to a harness, the Voyager Series can accommodate any diver’s needs.
As a part of our modular BCD system, the Voyager Series wings can be matched with either a TransPac® XT, Transplate, or any metal back plate and webbing harness.
Made in the USA.
Dive Rite Voyage XT or EXP Wing Specifications:
Model BC4700 Voyager EXP: Durable 1680 denier ballistic nylon (highly resistant to pinches and punctures)
Model BC5200 Voyager XT: SuperFabric brand technology outer shell and 1680 ballistic nylon diver’s side panel (extremely resistant to pinches and punctures)
Inner bladder: 210-denier nylon laminated (highly resistant to pinches and punctures)
Wing Gusset Control system for streamlining
Lift: 35 lbs. (15.8 kg)
LP inflator hose
16-inch rapid exhaust (pull-dump) or 12- or 16-inch elbow
Mounting: Two sets of marine-grade 316 stainless steel grommet holes are used to attach wing to harness and set diver trim
Urethane flanges: Welded in place, which make it easy to switch out corrugated hoses and over pressurization valves without tools
Weight: 2.8 lbs. (1.27 kg)
Size: 22-in. H x 19-in. W (55.8cm x 48.3cm)
Made in the USA
Dive Rite Crotch Strap 1.5 Inch details:
Does the standard 1-Inch Crotch Strap have you singing an octave higher, but you like the convenience of a Quick Release buckle? The 1.5-Inch Crotch Strap QR Buckle is a welcome change to old industry standards. It comes with a slide release buckle for divers who want the convenience of a crotch strap that can be adjusted on-the-fly, yet the 1.5-inch (38.1mm) strap is more comfortable, especially if tension is added such as when scootering. Also available without Quick Release buckle (BC1058-1.5).
Using a crotch strap allows divers to fasten the harness and backplate securely to the body, ensuring more uniform trim and buoyancy characteristics in-water. It also reduces the likelihood of the tank hitting the back of the head during a dive or while resting at the surface. Made in the U.S.A.
Dive Rite Crotch Strap 1.5 Inch Specifications:
One-inch nylon crotch strap has 2,200 lbs tensile strength and is 38-inches (96.5 cm) long.
Stainless steel 304 welded scooter ring.
Delrin engineered plastic quick release buckle for easy doff and don.
Made in USA
Dive Rite Stainless Steel Roller Buckle Cam Straps details:
No matter what the application is, Dive Rite has a cam strap that will work for it.
The stainless steel cam strap with roller buckle (BC2035) uses a 2-inch wide nylon webbing with marine grade stainless steel buckle. 36 inch (91.4cm) webbing length is suitable for cylinders from 6.9 inches (17.5cm) to 8 inches (20.3cm) in diameter, which includes them most popular sizes of cylinders. Nylon rollers on the cam strap protect the cylinder from being scratched by the buckle, while a rubber non-slip pad prevents the cylinder from shifting once the cam buckle has been secured. Excess webbing is secured using Velcro, which will also prevent the buckle from accidentally coming open. This cam strap comes standard on all Transpac XT, VoyagerPac, and TravelPac systems.
Dive Rite Stainless Steel Roller Buckle Cam Straps Specifications:
Lightweight, marine grade stainless steel buckle
36″ (91.4cm) length of 2″ webbing with 7,000 lb tensile strength
Weight: 11oz (311g)
Made in USA