Dive Rite Voyager XT Wing

Dive Rite Voyager XT Wing
Our PriceUS$460.00
CodeBC5200-16 / BC5200-E-12 / BC5200-E-16
Shipping:This item ships FREE!
Save wishlist
Add to comparison chart | Compare Products

The Dive Rite Voyager XT Wings, donut-shaped air cells for single-tank diving, provide divers essential buoyancy control. With 35 lbs. (15.8 kg) of lift, streamlined side panels, and its minimalist, oval shape, the Dive Rite Voyager XT Wings’ design provides maximum comfort throughout the dive with no squeezing or restrictions. The donut-shape design provides greater stability and control while diving by keeping an even volume of inflation on the top, sides, and bottom. This, along with an integrated Gusset Control System (GCS) that reduces "taco” effect and promotes effective streamlining, puts buoyancy where it is most needed (throughout the torso supporting the weight of the tank) for superior horizontal trim. The GCS is not like a bungee wing because it does not restrict airflow; instead, the GCS promotes added streamlining and buoyancy control, yet allows the Dive Rite Voyager XT Wing to inflate to its full capacity. Even floating on the surface, the Voyager Series wings excel by keeping the diver in a vertical position when used in conjunction with a harness and crotch strap; it won’t tip you over.

Made from rugged SuperFabric® brand technology XT material that creates an armor-clad outer shell that is impervious to damaging pinches and cuts, with a 1680 ballistic nylon diver's side panel. The Dive Rite Voyager XT Wing is further enhanced with a heavy-duty, 210 denier nylon laminated bladder.

Equipped with a choice of a 12- or 16-inch elbow or a 16-inch rapid exhaust (pull dump), appropriate low-pressure inflation hose, and two sets of marine-grade 316 stainless steel grommet mounting holes for attaching the Dive Rite Voyager XT Wing to a harness, the Dive Rite Voyager XT Wing can accommodate any diver’s needs.

As a part of our modular BCD system, the Dive Rite Voyager XT Wing can be matched with either a TransPac® XT, Transplate, or any metal back plate and webbing harness.

Made in the USA.


Dive Rite Voyager XT Wing Specifications:
Model BC5200 Voyager XT: SuperFabric brand technology outer shell and 1680 ballistic nylon diver’s side panel (extremely resistant to pinches and punctures)
Inner bladder: 210-denier nylon laminated (highly resistant to pinches and punctures)
Wing Gusset Control system for streamlining
Lift: 35 lbs. (15.8 kg)
LP inflator hose
16-inch rapid exhaust (pull-dump) or 12- or 16-inch elbow
Mounting: Two sets of marine-grade 316 stainless steel grommet holes are used to attach wing to harness and set diver trim
Urethane flanges: Welded in place, which make it easy to switch out corrugated hoses and over pressurization valves without tools
Weight: 2.8 lbs. (1.27 kg)
Size: 22-in. H x 19-in. W (55.8cm x 48.3cm)
Made in the USA


If you don't care for the extra armor of the XT series you can take a look at the Dive Rite Voyager EXP Wing.


If you need a smaller single tank wing, check out the Dive Rite Travel XT Wing of if you need larger, check out the Dive Rite Rec XT Wing.

If you are looking for the entire set up. Check out the Dive Rite Transpac XT / Voyager XT Wing Package.

Please review these other products:

 
Dive Rite Rec EXP Wing
View
A hybrid wing, the Dive Rite Rec EXP Wing can be worn on single or double tanks making it one of our most popular wings. When diving single tanks, the Dive Rite Gusset Control System streamlines the wing, keeping it close to the body.

click to see more

 
 
Dive Rite Voyager EXP Wing
View
The Dive Rite Voyager EXP Wings, donut-shaped air cells for single-tank diving, provide divers essential buoyancy control. With 35 lbs. (15.8 kg) of lift, streamlined side panels, and their minimalist, oval shape, the wings’ design provides maximum comfort throughout the dive with no squeezing or restrictions.

click to see more

 
 
Dive Rite Stainless Steel Assembly Screw AKA Sex Bolts
The Dive Rite Stainless Steel Assembly Screws also know as "Sex Bolts" are used for attaching various accessories to a TransPac harness or to a hard backplate (such as lift bag pouches, suit inflation mounting systems Our Price: US$17.00

click to see more

 
The Dive Rite Stainless Steel Assembly Screws also know as "Sex Bolts" are used for attaching various accessories to a TransPac harness or to a hard backplate (such as lift bag pouches, suit inflation mounting systems
Our Price: US$17.00

click to see more

 
XS Scuba Pony Pack Harness
View
The XS Scuba Pony Pac Harness is a small light weight harness used to attach a pony bottle on your back without having to rig up something difficult on your regular dive rig. The XS Scuba Pony Pac Harness is very popular for lifeguard rescue pacs and pool demo "Discover Scuba" systems. The XS Scuba Pony Pac Harness would also work great for those that need to do work on the bottom of a pool or under your boat and don't want to buy a full set up.

click to see more

 
 
XS Scuba Companion Compact Travel BCD
View
The XS Scuba Companion Compact Travel BCD is an Ultra Compact Travel BC designed from the popular XS Scuba Pony Pac Harness. With 30lbs of lift and 2 5lb weight pockets the XS Scuba Companion Compact Travel BCD is perfect for the traveling diver who wants their own BCD but want's to travel light.

click to see more

 
 
Dive Rite Travel XT Wing
View
A lightweight wing designed for single-tank, warm water diving, the Dive Rite Travel XT Wing is small-profile and ideal for travel and divers who wear a minimal amount of weight. At 25lbs/11.3 kg of lift, the Dive Rite Travel XT Wing can accommodate one 80ft3/12 L tank with no more than 16lbs. of additional weight.

click to see more

 
No recommended products at the moment.