Low Pressure Rubber Regulator Hose

Low Pressure Rubber Regulator Hose
Our PriceUS$26.95
CodeLPR-XX
Save wishlist

The Low Pressure Rubber Regulator hose is available in 19 different lengths and currently 2 different colors. All of the Low Pressure Rubber Regulator hoses are nitrox ready up to 40%. These are standard regulator hoses with 3/8-inch male fitting that will fit in most traditional first stage low pressure ports.The other end is 9/16-inch female which is compatible with most regulator second stage regulators, octo or primary. The Low Pressure Rubber Regulator hose is very simple to replace yourself and should usually only require a couple of adjustable wrenches. The length of the hose is generally measured from end to end including the fittings and threads.

Typical lengths of the primary second stage is either 28 or 30 inch but if you prefer slightly shorter 26 inch works well too. If you are looking to take more of the technical approach then you may want to shorten even further down to 22 inch and add a 90 degree swivel.

Typical lengths of the safety second stage otherwise known as the Octopus or (Octo) are going to be 32 to 34 inch but for some divers they like to advance further and go with a 5 foot for optimal reach.


Low Pressure Rubber Regulator hose Special Features:
Chrome Plated Brass Fittings
Length measured from end to end including fittings and threads
3/8-inch male to first stage
9/16-inch female to second stage
Nitrox ready up to 40%


Available sizes & Colors:
6" Black or Yellow
22" Black or Yellow
24" Black or Yellow
28" Black or Yellow
30" Black or Yellow
32" Black or Yellow
34" Black or Yellow
36" Black or Yellow
38" Black or Yellow
40" Black or Yellow
5' Black or Yellow
6' Black or Yellow
7' Black or Yellow
15' Black or Yellow
25' Black or Yellow
50' Black or Yellow
Please review these other products:

 
Miflex Low Pressure Braided Hoses
View
Miflex Low Pressure Braided Hoses feature an external nylon safety braiding designed to resist the snags and abrasions that divers can often encounter. The Miflex Low Pressure Braided Hoses also resists UV rays out of the water, thus extending the lifespan of the hose.

click to see more

 
 
Analox O2EII Sensor Saver Plug
View If you own the Analox O2EII Pro Portable Nitrox Checker and you have replaced the sensor before, then you know the importance of keeping the sensor cell covered and sealed. With the Analox O2EII Sensor Saver Plug you will prolong the life of the s

click to see more

 
 
Dive Alert Plus V2 Air Horn
View The Dive Alert PLUS is a specially designed, small, lightweight pneumatic signaling device that uses quick connect/disconnect hose couplings to become an integrated part of your power inflator. Installation is easy and takes only a moment.

click to see more

 
 
Gear Aid Zipper Lubricant Stick
Gear Aid Zipper Lubricant Stick

High performance lubricant for water tight and air tight zippers. Protects against rust, corrosion, chlorine and salt in all temperatures. Long lasting, contains no paraffin or si
Our Price: US$5.35
Retail Price: US$5.95

click to see more

 
Gear Aid Zipper Lubricant Stick

High performance lubricant for water tight and air tight zippers. Protects against rust, corrosion, chlorine and salt in all temperatures. Long lasting, contains no paraffin or si
Our Price: US$5.35
Retail Price: US$5.95

click to see more

 
High Pressure Rubber Hose
View
The High Pressure Rubber Hose is available in 13 different lengths. All of the Rubber hoses are nitrox compatible up to 40% These are standard High Pressure hoses with 7/16-inch Male fitting that will fit in the HP port of your first stage and 7/16-inch female fitting that will fit most high pressure SPG's or air integrated dive computers with the use of a high pressure air spool.


click to see more

 
 
Low Pressure Quick Disconnect Inflator Rubber Hose
View
The Low Pressure Quick Disconnect Inflator Rubber Hose is available in 12 different lengths. All of the Low Pressure Quick Disconnect Inflator Rubber Hoses are Nitrox compatible up to 40%. These standard inflator hoses have 3/8-inch male fittings at the first stage to standard BCD quick disconnect fitting at the other end.

click to see more